KRIPTO - Bio Pot Holder
Measure:9cm
Color:Bianco
Quantity:
Tempi di produzione: 2-3 giorni lavorativi
Pickup available at Sp Adelfia- ceglie km 5
Usually ready in 2-4 days
KRIPTO - Bio Pot Holder
9cm / Bianco
Sp Adelfia- ceglie km 5
Pickup available, usually ready in 2-4 days
Sp Adelfia- Ceglie km 5
70010 ADELFIA (BA) BA
Italy
Choose options
Measure:9cm
Color:Bianco
Quantity:
Tempi di produzione: 2-3 giorni lavorativi
Measure:9cm
Color:Bianco
Quantity:
Tempi di produzione: 2-3 giorni lavorativi
Pure geometry. Clean lines, no frills. Originally designed for the cacti in the lab, then you all took it.
Two sizes: for 9cm or 14cm pots.
Bio PLA. Pot cover: the pot goes inside, not the water.
— INDOOR SCULPTURE, NOT TO BE EXPOSED TO DIRECT SUNLIGHT —
Made with 100% plant-based bio materials 🌱 and 3D printed: a sustainable, innovative and unique choice.
ℹ️ TECHNICAL SPECIFICATIONS AND MAINTENANCE — 3D PRINTS
All our sculptures are made using additive 3D printing technology, which builds the object layer by layer until its final shape.
The micro-lines visible on the surface are not imperfections, but the trace of the print layers: a natural characteristic that makes each piece unique and authentic.
🔍 WHAT ARE «SEAMS»
During printing, the machine must always start and end each layer at a single point: this leaves faint vertical lines, called seams. These are not defects, but an inevitable consequence of the printing technique.
We strive to position them on the back or in less visible areas of the sculpture, to minimize their aesthetic impact.
🌱 MATERIAL
• Bio PLA (plant-based biopolymer)
• Plastic-free and eco-friendly
• Biodegradable under industrial conditions
🧽 MAINTENANCE AND CLEANING
To keep your sculpture in perfect condition:
✅ Dust: remove with a soft, dry cloth or an antistatic brush
✅ Gentle cleaning: if necessary, use a cloth slightly dampened with water
🚫 Avoid harsh chemicals, solvents, alcohol or acetone
🚫 Do not expose to direct heat sources (intense sun, radiators, stoves): PLA is sensitive to high temperatures
With these simple precautions, your 3D printed creation will maintain its beauty and durability over time ✨
Made with 100% plant-based bio materials 🌱 and 3D printed: a sustainable, innovative and unique choice.
ℹ️ TECHNICAL SPECIFICATIONS AND MAINTENANCE — 3D PRINTS
All our sculptures are made using additive 3D printing technology, which builds the object layer by layer until its final shape.
The micro-lines visible on the surface are not imperfections, but the trace of the print layers: a natural characteristic that makes each piece unique and authentic.
🔍 WHAT ARE «SEAMS»
During printing, the machine must always start and end each layer at a single point: this leaves faint vertical lines, called seams. These are not defects, but an inevitable consequence of the printing technique.
We strive to position them on the back or in less visible areas of the sculpture, to minimize their aesthetic impact.
🌱 MATERIAL
• Bio PLA (plant-based biopolymer)
• Plastic-free and eco-friendly
• Biodegradable under industrial conditions
🧽 MAINTENANCE AND CLEANING
To keep your sculpture in perfect condition:
✅ Dust: remove with a soft, dry cloth or an antistatic brush
✅ Gentle cleaning: if necessary, use a cloth slightly dampened with water
🚫 Avoid harsh chemicals, solvents, alcohol or acetone
🚫 Do not expose to direct heat sources (intense sun, radiators, stoves): PLA is sensitive to high temperatures
With these simple precautions, your 3D printed creation will maintain its beauty and durability over time ✨