What a Snail! - Head Down
Measure:15cm
Color:Bianco
Quantity:
Tempi di produzione:
2-3 giorni lavorativi
Pickup available at Sp Adelfia- ceglie km 5
Usually ready in 2-4 days
What a Snail! - Head Down
15cm / Bianco
Sp Adelfia- ceglie km 5
Pickup available, usually ready in 2-4 days
Sp Adelfia- Ceglie km 5
70010 ADELFIA (BA) BA
Italy
Choose options
Measure:15cm
Color:Bianco
Quantity:
Tempi di produzione:
2-3 giorni lavorativi
Measure:15cm
Color:Bianco
Quantity:
Tempi di produzione:
2-3 giorni lavorativi
Che Lumaca! — Testa in Giù. 🐌 La lumaca si porta la casa sempre con sé: dove va, è già a casa. È la versione raccolta e un po' buffa, quella che si fa i fatti suoi e sta benissimo così.
Cosa ricevi
- 📐 3 misure: 10, 15 e 20 cm
- 🎨 13 colori, fluo compresi
Perché ti piacerà
- 🌱 Stampata in PLA bio, rifinita a mano nel nostro studio
- ✋ Fatta su ordinazione: pronta in 2-3 giorni lavorativi
- 🎁 In coppia con la sorella a testa in su, ancora più carina
Spedizione sempre gratuita in Italia · Reso entro 14 giorni · Pagamenti sicuri.
— INDOOR SCULPTURE, DO NOT EXPOSE TO DIRECT SUNLIGHT —
Made with 100% bio-based, plant-derived materials 🌱 and 3D printed: a sustainable, innovative, and unique choice.
ℹ️ TECHNICAL SPECIFICATIONS AND MAINTENANCE — 3D PRINTS
All our sculptures are made using additive 3D printing technology, which builds the object layer by layer until its final shape.
The micro-lines visible on the surface are not imperfections but traces of the print layers: a natural characteristic that makes each piece unique and authentic.
🔍 WHAT ARE "SEAMS"
During printing, the machine must start and end each layer at a specific point: this leaves faint vertical lines called seams. These are not defects but an unavoidable consequence of the printing technique.
We strive to position them on the back or in less visible areas of the sculpture to minimize their aesthetic impact.
🌱 MATERIAL
• Bio PLA (plant-derived biopolymer)
• Plastic-free and eco-friendly
• Biodegradable under industrial conditions
🧽 MAINTENANCE AND CLEANING
To keep your sculpture in perfect condition:
✅ Dust: remove with a soft, dry cloth or an anti-static brush
✅ Gentle cleaning: if necessary, use a cloth lightly dampened with water
🚫 Avoid harsh chemicals, solvents, alcohol, or acetone
🚫 Do not expose to direct heat sources (intense sun, radiators, stoves): PLA is sensitive to high temperatures
With these simple precautions, your 3D-printed creation will maintain its beauty and durability over time ✨
Made with 100% bio-based, plant-derived materials 🌱 and 3D printed: a sustainable, innovative, and unique choice.
ℹ️ TECHNICAL SPECIFICATIONS AND MAINTENANCE — 3D PRINTS
All our sculptures are made using additive 3D printing technology, which builds the object layer by layer until its final shape.
The micro-lines visible on the surface are not imperfections but traces of the print layers: a natural characteristic that makes each piece unique and authentic.
🔍 WHAT ARE "SEAMS"
During printing, the machine must start and end each layer at a specific point: this leaves faint vertical lines called seams. These are not defects but an unavoidable consequence of the printing technique.
We strive to position them on the back or in less visible areas of the sculpture to minimize their aesthetic impact.
🌱 MATERIAL
• Bio PLA (plant-derived biopolymer)
• Plastic-free and eco-friendly
• Biodegradable under industrial conditions
🧽 MAINTENANCE AND CLEANING
To keep your sculpture in perfect condition:
✅ Dust: remove with a soft, dry cloth or an anti-static brush
✅ Gentle cleaning: if necessary, use a cloth lightly dampened with water
🚫 Avoid harsh chemicals, solvents, alcohol, or acetone
🚫 Do not expose to direct heat sources (intense sun, radiators, stoves): PLA is sensitive to high temperatures
With these simple precautions, your 3D-printed creation will maintain its beauty and durability over time ✨